3 x 15 (6 Lug) Front Wheel

• For use with 4.00 x 15" or 5.50 x 15" tires
• 3" wide (bead to bead) x 15" diameter (bead to bead)
• 6 lug bolt hole.
• 4-5/8" inside diameter pilot
• 3" center to center lug bolts
• 3.25" backspacing
• Off-White powder coat paint
• To determine backspacing, lay the wheel flat on the ground with the back of the wheel facing up. Next, lay a straightedge across the wheel and measure the distance from the backside of the mounting surface to the straightedge.
• To determine the width of rim, measure on the inside from bead to bead, not outside to outside.
• If you are only ordering 1 rim, then please measure the old rim BEFORE ordering, as other sizes could have been installed on your tractor at one time.
• Use with new lug bolts / nuts.
• Not designed for tubeless applications.
• Also used as a light weight rim for antique pulling tractors.

Fits Case models 

200 Some, W/ Tricycle Frt Axle, Using 3" x 15" Rim
200B Some, W/ Tricycle Frt Axle, Using 3" x 15" Rim
211B Some, W/ Tricycle Frt Axle, Using 3" x 15" Rim
211 Some, W/ Tricycle Frt Axle, Using 3" x 15" Rim
430 Some, To Sn: 8262800 W/ Tricycle Frt Axle, Using 3" x 15" Rim
431 Some, To Sn: 8262800 W/ Tricycle Frt Axle, Using 3" x 15" Rim
435 Some, To Sn: 8262800 W/ Tricycle Frt Axle, Using 3" x 15" Rim
441 Some, To Sn: 8262800 W/ Tricycle Frt Axle, Using 3" x 15" Rim
445 Some, To Sn: 8262800 W/ Tricycle Frt Axle, Using 3" x 15" Rim
480 Some, To Sn: 8262800 W/ Tricycle Frt Axle, Using 3" x 15" Rim

Fits Cockshutt models 

E2 Some, using 3" x 15" rim Co-Op
20 Some, using 3" x 15" rim

Replaces G10661 Case
Z130 Cockshutt